auto zone parts lookup sparkplug 1995 ford thounder bird

If the plugs are cleaned, the electrodes must be filed flat. Plugs can be cleaned on a spark plug cleaning machine, which can sometimes be found in service stations, or you can do an acceptable job of cleaning with a stiff brush.

Remember that any kind of deposit will decrease the efficiency of the plug. If they are not going to be replaced, clean the plugs thoroughly. Using a spark plug socket that is equipped with a rubber insert to properly hold the plug, turn the spark plug counterclockwise to loosen and remove the spark plug from the bore.Ĭheck the plugs for deposits and wear. If removal of the plugs is difficult, apply a few drops of penetrating oil or silicone spray to the area around the base of the plug, and allow it a few minutes to work. Remove the spark plugs when the engine is cold, if possible, to prevent damage to the threads. If compressed air is not available, use a rag or a brush to clean the area. Using compressed air, blow any water or debris from the spark plug well to assure that no harmful contaminants are allowed to enter the combustion chamber when the spark plug is removed. Be sure to pull on the boot, not on the wire, otherwise the connector located inside the boot may get separated. Take a minute before you begin and number the wires with tape.ĭisconnect the negative battery cable, if the vehicle has been run recently, allow the engine to cool.Ĭarefully twist the spark plug wire boot to loosen it, then pull upward and remove the boot from the plug. Don't start by removing the plug wires all at once, because, unless you number them, they may become mixed up.

When you're removing spark plugs, work on one at a time.

Auto zone parts lookup sparkplug 1995 ford thounder bird